Provides Opinion & Testimony In:
Engineer Mechanical HVAC, Plumbing, Sprinklers, Indoor Air Quality Testing Analysis, Construction Contracts, Bid Documents, Energy Studies, Fire Cause Origin, Boilers,Roofing Material Fires
Expert has over 45 years of experience in the design of mechanical systems the building industry which includes 25 years of experience conducting forensic engineering of problematic mechanical systems and components.
Expert’s education, training and experience includes the following systems and
• Air Conditioning
• Fire Protection Sprinklers
Expert is qualified as an “Expert” in the mechanical engineering field and is investigative work involving report writing, depositions and litigation support. The following is a listing of the categories in which Expert is highly qualified and experienced.
• Property loss or damage related to the failure of mechanical systems
• Personal injury caused by mechanical systems and equipment.
• Design analysis of mechanical systems and components.
• Product analysis of mechanical equipment.
• Code and Standards compliance for mechanical systems and components.
• Start up and testing of mechanical equipment and components.
• Construction contracts and bid documents.
The following is a brief outline of the mechanical systems and components for which Mr. provided examination, analysis, investigative reports and expert witness testimony.
• Natural gas piping systems, boilers, furnaces, water heaters and appliances related fire and explosion.
• Propane piping systems, boilers, furnaces, water heaters and appliances ing related fire and explosion.
• Fuel oil piping systems, boilers, furnaces, water heaters, pumps and storage including related fire and explosion.
• Steam piping systems, boilers and deaerators.
• Fire places, gas insert heaters and wood burning stoves.
• Chimneys, flues and vents for products of combustion including property damage
• Carbon monoxide gas production including related wrongful deaths and
• HVAC piping systems air handling units, fans, water chillers, cooling towers and ductworh.
• Refrigerant piping systems, compressors, condensing units ati‹i i›oat pumps.
• Fire protection sprinkler piping systems(wet & dry), storage tanks and pumps including freeze related failures.
• Plumbing pipingsystems, fixtures, domestic water heaters, pumps and clothes washing machines including freeze related failures.
• Scalding from domestic hot water systems including related wrongful deaths and b ›dily
• Maintenance, service and repair worh.
B.S.M.E. 1968, Drexel University REGISTRATIONS
State of Delaware – Professional Engineer, 2005 – 15494
State of Pennsylvania – Professional Engineer, :£968 – PEO14315E
State of New Jersey – Professional Engineer, 1972 – 24GE0192870O
Professional Land Planner – 1979 State of New York – Professional Engineer, 1998 – 5757115 State of Ohio – Professional Engineer, 1978 – EO43874
State of Connecticut, 2011- PEN.0028291 District of Columbia, 2011- PE906194
Department of Defense – Fallout Shelter Analyst, 1970
American College of Forensic Examiners – Certified Forensic Consultant, 2005 Association of Energy Engineers – Certified Energy Manager, 1982
OSHA Certified for Confined Space Safety, 2010 Gastite Piping Systems Qualified Installer, 2011
Expert has held membership in the following societies and associations which were instrumental in developing the skills and knowledge he possesses relating to the construction industry contracts, management, design, construction, commissioning, maintenance and forensic analysis.
AAA- American Arbitration Association
ABSA – American Biological Safety Association
ACFE- American College of Forensic Examiners
AEE – Association of Energy Engineers
AIPE – American Institute of Plant Engineers
ASHE – American Society of Hospital Engineers
ASHRAE- American Society of Heating, Refrigerating & Air Conditioning Engineers
ASPE- American Society of Plumbing Engineers ASSE- American Society of Safety Engineers AWWA – American Water Works Association
BOCA – Building Dfficials & Code Administrators
ISPE – International Society of Pharmaceutical Engineers
NFPA- National Fire Protection Association
NFSA- National Fire Sprinkler Association
NSPE – National Society of Professional Engineers
SCA – Smoke Control Association
SFPE- Society of Fire Protection Engineers
TRAINING and CONTINUED EDUCATION COURSES
Association of Energy Engineers – Plant & Building Energy Conservation Seminar, 1983
Certification Course on Energy Management, 1982 ASHRAE – Fire Protection & Safety in Buildings, 11/19/81
Engineers Club of Philadelphia – Fire Protection Engineering, 11/17/77
SFPE/ASHRAE – Smoke Control Seminar, 4/27/83 Department of Defense – Fallout Shelter Analysis, 5/18/70 FDA-ISPE Joint Conference, 3/:£2/84
TPC Training Systems
Refrigerants & Refrigerant Oils, 3/19/93
Air Conditioning & Refrigerant Compressors, 3/26/93
trouble Shooting Refrigeration Systems, 4/2/93 How Power Plants Work, 2/4/94
Generating Steam in the Power Plant, 2/7/94
Using Steam in the Power Plant, 2/8/94
The Trane Company
TRACE Direct Training, 7/24/8o
Gas Furnace Service, 9/30/98
Beckett Corporation – Installation, Adjustment Servicing and Combustion Efficiency Oil Burners, 9/30/98
Viking Company – Fire Protection Seminar, 6/7/99
National Propane Gas Association – Installation of Propane Gas Systems, 1/3/00
National Fire Sprinkler Association – Inspection, Testing & Maintenance of Water-based Fire
Protection Systems, 5/9/00
Hydraulics for Fire Sprinkler Systems 5/30/08
Petroleum Marketer’s Association of America – Oil Heat Technician Training, 1/1s/of
Fire Findings – Investigation of Gas & Electric Appliance Fires, 4/16/02, 4/17/02 Investigation of Solid Fuel Burning Appliance Fires, 10/28/09, 10/29/09
Siemens Building Technologies – Life Safety Training Course, 5/07/04
American College of Forensic Engineers – Forensic Expert’s Guide to Litigation Conference, 2005
National Oil Heat Research Alliance – Residential Hands-On Burner Program, 8/23/05
Burner Program, 8/25/05
Lorman Education Services – Building Codes in Pennsylvania, 5/19/06 Chubb Services Corporation
Combustion Systems Safety Workshop 9/20/07
Dry, Deluge & Pre-action Sprinkler Systems, 9/25/07
Maintaining Water Based Fire Protection Systems, 9/27/07 & 9/28/07
Occupational Safety Health Administration (OSHA)
Certificate of Completion – Confined Space Safety 5/10/10
Gastite Division Certification Training Program – Design and Installation of Corrugated Stai
Steel Tubing (CSST) Piping Systems –
Expert is knowledgeable of the standards and guidelines issued by the following organizations and Expert’s library contains many of the standards and guidelines produced by hese organizations. Expert regularly utilizes these standards and guidelines in his design, an zlysis and inspection of mechanical systems and components. When applicable, Expert will communicate with these organizations to determine which, if any, of these standards and guid‹ lines have been updated or replaced and obtain same for the purposes needed.
AABC Associated Air Balance Council
ABMA American Boiler Manufacturers Association
ACCA Air Conditioning Contractors of America
ACGIH American Conference of Governmental Industrial Hygienists
AGA American Gas Association
AGC Associated General Contractors of America
ACEC American Consulting Engineers Council
AIA American Institute of Architects
AISI American Iron & Steel Institute
AMCA Air Movement & Control Association International, Inc.
ANSI American National Standards Institute
API American Petroleum Institute
APPA Association of Physical Plant Administrators of Universities & Colleges
ARI Air Conditioning & Refrigeration Institute
ASME American Society of Mechanical Engineers
ASNT American Society for Nondestructive Testing
ASQC American Society for Quality Control
ASTM American Society of Testing Materials
AWS American Welding Society
AWWA American Water Works Association
BOMA Building Owners’ & Managers’ Association
CGA Compressed Gas Association, Inc.
CSA Canadian Standards Association
Csl Construction Specification Institute
FM Factory Mutual Engineering Corporation of Factory Mutual Global
FEMA Federal Emergency Management Agency
GAMA Gas Appliance Manufacturers Association
GBCA General Building Contractors Association, Inc.
GRI Gas Research Institute
GPBPA Greater Philadelphia Building Professionals Association
HUD Housing and Urban Development
ICBO International Conference of Building officials
IFSTA International Fire Service Training Association
IIAR International Institute of Ammonia Refrigeration
MABSA Mid-Atlantic Biological Safety Association
MSS Manufacturers Standardization Society of the Valve & Fittings Industries
NADCA National Air Duct Cleaners Association
NAEW National Academy of Expert Witnesses, Inc.
NEBB National Environmental Balancing Bureau
NEMI National Energy Management Institute
NFPA National Fire Protection Association
NIA National Insulation Association
NPGA National Propane Gas Association
NRCA National Roofing Contractors Association
NSC National Safety Council
OSHA U.S. Dept. of Labor, Occupational Safety & Health Administration
PHCC Plumbing-Heating-Cooling Contractors Association
REZA Refrigerating Engineers & Technicians Association
RSES Refrigeration Service Engineers society
SMACNA Sheet Metal & Air Conditioning Contractors National Association
TABB Testing, Adjusting & Balancing Bureau
UL Underwriters Laboratory
Speaker – Philadelphia ASHRAE Chapter 1984
Certificate of Appreciation – Science Fair Judge – Engineers Club of Trenton, 1987 &
ASHRAE – Certificate of Meritorious Service, 4/23/82
2020 to Present
At the end of 2019, the office of NRG Consultants Incorporated was dissolved and all forensic engineering investigation worh was transferred to Hallowell Engineering.
Expert is responsible for business development, finances and project activities related to forensic engineering investigative worh. Expert is also for expert witness testimony and litigation support.
1991 to 2020
Responsible for managing a consulting engineering practice involving forensic investigation work and the design of heating, ventilating and air conditioning AC), refrigeration and fire protection systems for buildings in the high-tech industrial,
and commercial fields.
Total responsibility for all business development, finances, design and project activities including: proposals, presentations, budgets, fee and contract negotiations, allocation, project scheduling and profit projections.
1991 to 2012
Director of Mechanical Engineering Dawson Engineering Inc.
Responsible for the following services:
• Conceptual design of mechanical systems and selection of equipment for commercial, industrial, educational and residential type facilities. Mechanical encompass heating, refrigeration, ventilation, air conditioning, plumbing, fire and waste water disposal.
• Preparation of construction documents (drawings and specifications).
• Economic studies and evaluations.
• Site investigations and surveys.
• Cost estimating.
• Construction administration.
1984 to 1991
Principal and Director of Engineering Edward A. Sears Associates
New York, New York
New York City office responsibilities included supervising project engineers/manager!i and designer/draftsmen in completing mechanical systems desig» for commercial and institu ional projects.
New Jersey branch office responsibilities included for business development and project management for 18 person office. Major projects included: hospital suites, medica and industrial research labs, university buildings, hotels and commercial/corporateoffice builc ings.
Management responsibilities included business development, presentations to architect.› and owners, fee/contract establishment and negotiations, budget and manpower scheduling cost estimating, system selection, equipment specifications, conceptual design, technical q ality control, supervision of detailed design to resolve unique technical problems and status rev ews.
New gymnasium and recreational pool, Rutgers University, Newark, New Jersey can pus. Estimated Construction Cost $4,500,000. Building area square feet 31,000
Addition of 1500 ton absorption chiller, New York Hospital.
Replacement of major mechanical and electrical components, Peter Rodino Feileral Building, Newark, New Jersey.
Estimated Construction Cost $ 3,8OO,OO0.
Tenant fit out for corporate office facilities, Johnson & Johnson, New Brunswick, New Jersey.
Technical assistance reports & energy conservation studies for 25 buildings – t›rew University, Madison New Jersey.
177 room addition to the Marriott Hotel, Newark Airport, NewarH, New Jersey.
Refrigerated warehouse & distribution center, Elizabeth, New Jersey. Estim ated Construction Cost $6,500,000.
Responsible for Energy Studies, Analysis, Reports, Fire Investigations, Heating, Cooling, Plumbing and Fire Protection Design.
NOTE: In June 1984 the office of NRG Consultants merged with Edward A. Sears
and relocated to Trenton, New Jersey. Expert was responsible for managing
1979 to 1984
Director of HVAC Engineering CUH2A Architects & Engineers Princeton, New Jersey
Responsible for client contact, sales presentations to clients, management of HVAC staff 32 people, project scheduling, cost control, conceptual and detailed design for
Research Laboratories, Hospitals and Office Buildings, plus Energy Management
Pfizer, Inc., Pfizer Central Research Laboratory, Groton, CT
22O,O0O sq. ft. Drug discovery facility including biology and chemistry
:£6,OOO sq. ft. animal facility, administrativeoffices, library, auditorium, and central service area.
E.R. Squibb & Sons, Inc., New Brunswick, NJ
55,000 sq. ft. Quality Control Laboratory including microbiological and control laboratories and extensive sterility testing areas.
American Home Products Corporation, Ayerst Laboratories Research Center, Brunswick, NJ
285,000 sq. ft. Pharmaceutical research facility including medicinal chemistry, bio- chemistry, microbiology and pharmacology laboratories, 2O,OOO sq. ft., animal , administrative offices, library, auditorium and central food service area.
Exxon Biomedical Sciences, Inc., Toxicology Lab & Animal Handling Facility, East Milestone, NJ
Alterations to 55,000 sq. ft. environmental health science laboratory. Master pl zn for additions to environmental health science laboratory, new aquatic toxicology laboiatory.
Nabisco, 6O million dollar Research Laboratory & Administrative Office, East Hanover, NJ
St. Peter’s Hospital
Middlesex County Medical Center
RCA Administrative Office Building, Morrestown, NJ
Ocean and Atlantic County Community Colleges 1975 to 1979
Creative Design Associates, Inc., Warminster, PA
Responsible for Business Development, Management, Cost Control, Design of HVAC Plumbing, Fire Protection & Solar Heating Systems.
Representative Projects: Churches, Schools, Shopping Centers, Nursing Homes, Cffice
Buildings, Apartment Complexes
Largest Projects: Heritage Towers Total Care Facility, Doylestown, PA, 238
Apartment Units plus 6O Bed Nursing Home
Master Planning for new Naval Academy, Saudi Arabia – Central Chiller Water Plant, Approximately 9,000 tons.
1965 to 1975
A.J. Creati & Associates, Inc. Elhins Parh, PA
Responsible for HVAC, Plumbing, Fire Protection, Process Piping Design, Specification Writing, Cost Estimating, storm Water Management, Life Cycle Cost Analysis, Construction Administration, and Contracts. Supervised a staff of six people in HVAC and Plumbing D‹›sign. Started employment as a Designer.
Representative Projects: Largest Project:
Shopping Centers, Industrial Buildings, Office Buildings
Columbia Mall, Columbia, MD – Largest enclosed mall on the East coast with a central chilled water & heating plant.
1959 to 1965
Charles Barrows, Consulting Engineer, Levittown, PA
Responsible for HVAC, Plumbing & Electrical Design for Residential and Commercial Buildings. Representative Project: Cheltenham Shopping Center, Cheltenham, PA